Description
- High Elasticity
- Bonding on difficult substrate
- Provided fine basecoat for smooth finish
- Low Shrinkage
Shelf life and Guarantee
12 months from production date if kept sealed in original container and stored in dry conditions. Manufacturer Civil Responsibility.
Working Temperature
Not below 8oC or above 30oC. Protect work from adverse weather conditions until the finishing coat is applied and fully cured. In hot weather, cure with light water mist for the first 48 hours. Observe current health and safety regulations.
Preparation
In ordering drum mixes or with a mortar wisk (mix for about 5 minutes). Do NOT over saturate the mortar. The mortar is workable for up to 4 hours, depending on weather conditions
Water addition
4.5 to 5 liters per 20 kg bag
Consumption per 20 kg bag
1.7 kg per mm of thickness per m2
Application
Clean and dust free sound background
External and Internal use: Waterproofed, Painted Surfaces, Metal, Masonry, Terracota, Ceramic Tiles,
Plasterboards, Cement Renders, Roman Cement,
Internal Use only: Gypsum gauged mortars, Lime renders Plasters, Insulation Boards
Do not hesitate to consult us for any technical advice and additional recommendation.
Recommendation: Before starting, always try on a small test area.
Health and Safety: Follow the instructions on the safety data sheet and wear appropriate equipment (gloves, mask, safety shoes…)
This document is for general information only and does not constitute a specification. For further guidance, contact your Saint-Astier® agent.
